2023 LaneShark LS-3 Standard Motor

• The Lane Shark LS-3 is a light duty rotary cutter designed to clear overgrown roadways, for light land management, and property maintenance.

• Easily cuts up to 2-3” diameter limbs, brush, saplings, and underbrush. The Lane Shark has 11 positions that allow it to cut vertically, offset, directly in front (level), or 25°, 35°, & 45° in the vertical and offset positions.

• The Lane Shark LS-3 attaches to the front of any FEL tractor with a SSQA or JD Hook & Pin-Style attachment system. There are adapters available to fit most other applications sold separately.

• The Lane Shark LS-3 weighs just under 320 lbs.

• In order for the Lane Shark LS-3 brush cutter to operate to full potential, the tractor must have a hydraulic flow rate of at least 5 GPM.

• To run the Lane Shark, you must have rear remotes or third function. ONLY pressure comes from the remote, and return must be to the sump. (CANNOT RETURN THROUGH AUXILIARY HYDRAULICS).

• When purchasing the Lane Shark LS-3 brush cutter, you will receive a unit equipped with #8 ORB (O-ring Boss) inlets. When using ORB, a minimum inside diameter of 3/8” is required.

• Some tractors may require a high capacity motor. If your tractor meets the specifications for an LS-3, but has a hydraulic flow rate above 8.5gpm, you will need a high capacity LS-3

• The LS3, like the LS2, has the same multi-position cutting capabilities, but is manufactured specifically for smaller tractors. The LS3 comes equipped with a 32” cutting diameter, and is compatible with tractors with a minimum weight of 2000lbs and a hydraulic flow range of 5-8.5gpm.